SR Special Items & Locations

Note: B1 bellows location is between girders 1 and 2, B3 bellows location is between girders  3 and 4; Section 6 is where ID devices are normally installed.

SECTORS     ITEMS (Locations) COMMENTS
1
  1. Flag, S01AFL (B1 Bellows)
  2. Backscattering absorber (B2 - NeG Side )
  1. Flag Picture                     
  2. Backscattering absorber
2     Stripline (B3 Bellows) Unused (Stripline Picture)
3
  1. Skew Quad (B1 Bellows)
  2. Stripline (B3 Bellows)       
Stripline not in use
4     Stripline (B3 Bellows)  
5      Skew Quad (B3 Bellows)  
6     Stripline (B3 Bellows)  
7
  1. Skew Quad (B1 Bellows)
  2. Flag, S07BFL (B3 Bellows)  
 
8,10,12     None  
9,11     Skew Quad (B1 Bellows)  
13     Skew Quad (B3 Bellows)  
14     Flag, S14BFL (B3 Bellows)  
15,23,27,31,33     Skew Quad (B1 Bellows)  
19
  1. Skew Quad (B1 Bellows)
  2. Flag, S19BFL (B3 Bellows)
  
17,21     Skew Quad (B3 Bellows)  
25
  1. Skew Quad (B3 Bellows)
  2. Be-Cu Fingers Test (upstream Section 6)
  3. Glidcop Fingers Test (downstream Section 6)
  
29,33,37     Skew Quads (B3 Bellows)  
16,18,20,22,24     None  
26     Flag, S26BFL (B3 Bellows)  
28,30     None  
31     Flag, S31BFL (B3 Bellows)  
34     Window Frame Scraper (B3 Bellows) Window Scraper Picture
35
  1. Skew Quad (B1 Bellows)  
  2. Flag, B35BFL (B3 Bellows)                             
  3. Current Monitor (Upstream Section 6)             
  4. Transition Absorber (Upstream of 2)                 
Current Monitor Picture
36
  1. Vertical Scrapers (B3 Bellows)                            
  2. RF Cavities (Section 6)                                      
  3. Flange Absorbers (Cavity # 3 and 4, Section 6) 
  4. RF Taper absorber (downstream Section 6)     
  5. Pinger magnet (downstream Taper Absorber)   
SR RF Cavities
37
  1. Skew Quad (B3 Bellows)                                 
  2. RF Cavities (Section 6)                                   
  3. Flange Absorbers (Cavity # 3 and 4, Section 6) 
  4. RF Taper Absorber (downstream Section 6)   
 
38
  1. Vertical Scrapers (B3 Bellows)                     
  2. RF Cavities  (Section 6)                                                   
  3. Flange Absorbers (Cavity # 3 and 4, Section 6)                    
  4. RF Taper Absorber (downstream Section 6)
  5. Kicker Magnet IK1 (downstream of 4)         
Vertical Scraper Picture
39
  1. Horizontal Scraper (B3 Bellows)                    
  2. Kicker Magnet IK2 (upstream Section 6)     
  3. Flag, S39BFL (downstream of IK2)                               
  4. Thick Septum Magnet  (adjacent to Section 6)                                  
  5. Mini Flag (downstream of 4)                          
  6. Thin Septum magnet (Section 6)                    
  7. Kicker Magnet IK3 (downstream of 6)         
Mini Flag - New Design in

Progress
40
  1. Flag S40AFL(B1 Bellows)                                           
  2. Horizontal Scraper (B3 Bellows)                   
  3. Flag (upstream Section 6)                              
  4. RF Cavities  (Section  6)                                                  
  5. Flange Absorbers (Cavity # 3 and 4, Section 6)
  6. RF Taper Absorber (downstream Section 6)
  7. Kicker Magnet IK4 (downstream of 6)         
Horizontal Scraper Picture