Hello,
Please let me to ask you a question on a very simple operation using elegant:
I would like to track a single particle with a given set of initial coordinates (x,x',y,y',delta) and track it over a specified beamline (lattice) and extract its final coordinates at the end of the beamline.
I went through "run_control" and "run_setup", but I could not find how this could be done.
I am sorry for the question and thank you very much in advance for your kind help.
R. Nagaoka
Tracking of a single particle with given initial coordinates
Moderators: cyao, michael_borland
Re: Tracking of a single particle with given initial coordinates
Hello,
While waiting to get your kind feedback, I looked into related exchanges in the Forum and found that use and declaration of centroid[] in the input block &bunched_beam, along declaration of some orbit conditions in &track could respond to my wanted actions. So please let me pursue this possibility and if I still don't manage to obtain what I wish, please let me re-submit my request for your help at that stage.
Thanking you,
R. Nagaoka
While waiting to get your kind feedback, I looked into related exchanges in the Forum and found that use and declaration of centroid[] in the input block &bunched_beam, along declaration of some orbit conditions in &track could respond to my wanted actions. So please let me pursue this possibility and if I still don't manage to obtain what I wish, please let me re-submit my request for your help at that stage.
Thanking you,
R. Nagaoka