Yue,
Try "make clean" before "make MPI=1".
--Michael
run_setup very slow for very long beam line.
Moderators: cyao, michael_borland
-
- Posts: 1951
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: run_setup very slow for very long beam line.
Now Pelegant works like a charm.
Thank you very much and have a nice weekend.
Yue
Thank you very much and have a nice weekend.
Yue
Re: run_setup very slow for very long beam line.
Hi, Michael
I am trying to track the long lattice many times, each varying some parameters. Is there a way of loop inside the command file without read the same lattice repeatedly, since it still takes seconds to read.
Thanks,
Yue
I am trying to track the long lattice many times, each varying some parameters. Is there a way of loop inside the command file without read the same lattice repeatedly, since it still takes seconds to read.
Thanks,
Yue
-
- Posts: 1951
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: run_setup very slow for very long beam line.
Yue,
Yes, this is possible using the &vary_element command. See
http://www.aps.anl.gov/Accelerator_Syst ... ode79.html
--Michael
Yes, this is possible using the &vary_element command. See
http://www.aps.anl.gov/Accelerator_Syst ... ode79.html
--Michael