Dear Elegant developer(s):
I was reading the documentation of CSRCSBEND and thought that all the setting of CSBEND can still be used.
However, when I have FSE_CORRECTION, the program complains:
"Error: unknown parameter FSE_CORRECTION used for BCX12 CSRCSBEND (parse_element)"
I wonder why? Does FSE_CORRECTION hinder CSR calculation in some way?
Thanks
CSRCSBEND with FSE_CORRECTION setting not allowed?
Moderators: cyao, michael_borland
-
- Posts: 4
- Joined: 18 Apr 2019, 07:41
-
- Posts: 1951
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: CSRCSBEND with FSE_CORRECTION setting not allowed?
There's no problem in principle with including FSE correction for CSRCSBEND. It's just a little complicated to code it.
It's possible to do this by hand using the optimizer to adjust the FSE parameter in order to minimize the centroids (Cx and Cxp).
I'll look into adding the feature.
--Michael
It's possible to do this by hand using the optimizer to adjust the FSE parameter in order to minimize the centroids (Cx and Cxp).
I'll look into adding the feature.
--Michael