Hi
I'd like to model an off-axis quadrupole used as a bending magnet with CSR. Is it possible to use CSRCSBEND with a K1 term and FSE to turn off the dipole field but keep the reference co-ordinate bend?
Thanks
James
Tracking through offset quadrupole with CSR
Moderators: cyao, michael_borland
-
- Posts: 1951
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: Tracking through offset quadrupole with CSR
James,
Can you tell me what you are trying to accomplish with the simulation? Is it to model the CSR from a misaligned quadrupole?
--Michael
Can you tell me what you are trying to accomplish with the simulation? Is it to model the CSR from a misaligned quadrupole?
--Michael
Re: Tracking through offset quadrupole with CSR
Hi Michael
It's an offset quadrupole being used as a bending magnet in the NLS linac. After discussion I think we can add a K1 component to the CSRCSBEND and get the right additional focussing for off-axis particles.
Thanks
James
It's an offset quadrupole being used as a bending magnet in the NLS linac. After discussion I think we can add a K1 component to the CSRCSBEND and get the right additional focussing for off-axis particles.
Thanks
James