Divide elements for CSRDRIF and CSRCSBEN

Moderators: cyao, michael_borland

Post Reply
sgess
Posts: 3
Joined: 12 Apr 2011, 14:18

Divide elements for CSRDRIF and CSRCSBEN

Post by sgess » 01 Nov 2011, 15:48

Hi-

I noticed that the divide_elements command works for CSRDRIF but not CSRCSBEN. In the elegant manual it says that divide_elements can only be applied QUAD, SBEN, RBEN, DRIF, and SEXT. Is it possible to have divide_elements extended to cover the CSRCSBEN element?

Thanks
Spencer

michael_borland
Posts: 1796
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:

Re: Divide elements for CSRDRIF and CSRCSBEN

Post by michael_borland » 02 Nov 2011, 11:52

Spencer,

It would be difficult to provide this capability because elegant doesn't know how to propagate CSR from one bend to another.

If you want information from inside the CSRCSBEND, try the OUTPUT_FILE and PARTICLE_OUTPUT_FILE parameters. They may give you what you need.

--Michael

Post Reply