coupled_twiss_output command doesn't calculate beam sizes

Moderators: cyao, michael_borland

Post Reply
duanz
Posts: 50
Joined: 30 May 2009, 01:50

coupled_twiss_output command doesn't calculate beam sizes

Post by duanz » 15 Jun 2009, 10:16

Dear Michael,
I want to use the coupled_twiss_output command to calculate the beam sizes, however, it does not output the beam size parameters to the ".ctwi" file(see the attached files). How can I get these parameters?
Thanks!

duanz
Attachments
parTwiss.ele
(578 Bytes) Downloaded 1280 times

michael_borland
Posts: 1927
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:

Re: coupled_twiss_output command doesn't calculate beam sizes

Post by michael_borland » 09 Sep 2009, 08:38

Sorry I didn't see this one sooner.

The best way to compute the beam sizes with coupling is using the moments_output command.

I've attached an example.

For example, to see the vertical beamsize due to quadrupole tilt errors
% elegant parMoments.ele
% sddsplot -column=s,s3 parMoments.mom -split=page

--Michael
Attachments
parMoments.ele
(541 Bytes) Downloaded 1196 times
par.lte
(2.48 KiB) Downloaded 1137 times

Post Reply