There's a bug in orbit/trajectory correction that appears if one sets track_before_and_after=1. The symptom is that subsequent trajectories will steadily grow in magnitude if many seeds are simulated.
This affects version 24.0 and 24.1, and was reported by Guimei Wang (BNL). At this point, no fix is available and I suggest keeping track_before_and_after=0 in the &correct command.
--Michael
trajectory correction bug
Moderators: michael_borland, soliday
-
- Posts: 1933
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
-
- Posts: 1933
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: trajectory correction bug
This has been fixed in release 25.0.2.
--Michael
--Michael