trajectory correction bug

Moderators: michael_borland, soliday

Post Reply
michael_borland
Posts: 1927
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:

trajectory correction bug

Post by michael_borland » 09 Sep 2011, 15:33

There's a bug in orbit/trajectory correction that appears if one sets track_before_and_after=1. The symptom is that subsequent trajectories will steadily grow in magnitude if many seeds are simulated.

This affects version 24.0 and 24.1, and was reported by Guimei Wang (BNL). At this point, no fix is available and I suggest keeping track_before_and_after=0 in the &correct command.

--Michael

michael_borland
Posts: 1927
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:

Re: trajectory correction bug

Post by michael_borland » 01 Mar 2012, 18:19

This has been fixed in release 25.0.2.

--Michael

Post Reply