Rectangular dipole magnet setting in elegant
Posted: 17 Apr 2018, 04:51
Hello, I would like to ask you about the bending dipole magnet setting in ELEGANT.
For the rectangular bending dipole magnet (Sben with edge angle), edge angle is half of the
bending angle, and the beam design entry/exit angles are also half of the bending angle.
Then, in the elegant setup for rectangular dipole using sben with has e1, e2 of half of bending angle,
I am wondering we could safely say that the bending dipole magnet itself is set with half of the bending angle towards the beam.
attachment=0]Rben_elegant__.png[/attachment]
Thank you!
Seongyeol
For the rectangular bending dipole magnet (Sben with edge angle), edge angle is half of the
bending angle, and the beam design entry/exit angles are also half of the bending angle.
Then, in the elegant setup for rectangular dipole using sben with has e1, e2 of half of bending angle,
I am wondering we could safely say that the bending dipole magnet itself is set with half of the bending angle towards the beam.
attachment=0]Rben_elegant__.png[/attachment]
Thank you!
Seongyeol