Hi,
I have generated a phase ellipse which I want to track through a lattice to look at aberrations. Initially I was tracking through a vertical spreader and I see enormous offsets (both in y and y') in the vertical phase space after just the first dipole and quad. In fact, all particles are lost by the end of the spreader. I suspect it has something to do with the fact that I am using csrcsbends and dividing quadrupoles into slices. Is this correct? And what should I be doing to fix this?
Thanks,
chris
tracking phase ellipse
Moderators: cyao, michael_borland
-
- Posts: 1933
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: tracking phase ellipse
Chris,
I'd guess that using CSRCSBENDs is the problem. If you have a phase ellipse with zero bunch duration, the CSR will be enormous. Try a zero-charge beam or substituting a CSBEND. Splitting quads shouldn't be an issue per se.
--Michael
I'd guess that using CSRCSBENDs is the problem. If you have a phase ellipse with zero bunch duration, the CSR will be enormous. Try a zero-charge beam or substituting a CSBEND. Splitting quads shouldn't be an issue per se.
--Michael
Re: tracking phase ellipse
Michael,
Yeah, the zero length bunch was the issue. Using csbends seems to work fine.
Thanks!
chris
Yeah, the zero length bunch was the issue. Using csbends seems to work fine.
Thanks!
chris