Large Cx Amplitude in Beamline Model with ZTRANSVERSE
Moderators: cyao, michael_borland
-
- Posts: 5
- Joined: 23 Aug 2013, 03:50
Large Cx Amplitude in Beamline Model with ZTRANSVERSE
I'm trying to simulate the transverse y impedance using the ZTRANSVERSE command with BBR in a simple beamline model. The model includes elements like ILM, SREFFECTS, RFCA, and an impedance element (LST files attached). However, I'm encountering a large amplitude in the Cx value that I can't eliminate. The center position and angle have no offset and are zero, and the impedance is defined as the y-direction, so I think the question is rather why it vibrates so much in the x-direction?
- Attachments
-
- v07_14_ele_z_rev7.lte.txt
- (627 Bytes) Downloaded 23 times
-
- csr_v07_14_z_rev7.ele.txt
- (1.86 KiB) Downloaded 29 times