off-resonance condition in LSRMDLTR

Moderators: cyao, michael_borland

Post Reply
cloud9
Posts: 4
Joined: 15 Mar 2010, 04:31

off-resonance condition in LSRMDLTR

Post by cloud9 » 17 Oct 2010, 09:56

Hello everyone,
I have one confusion about LSRMDLTR section. Manual says LSRMDLTR works for FEL resonance condition.
Laser wavelength, If zero, the wavelength is calculated from the resonance condition.
I would like to know wheather LSRMDLTR will work for off-resonance condition too or it is made only for resonance condition.


Kindly looking forward to your response
Kumar
Top
michael_borland
Posts: 2008
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:
Contact michael_borland

Re: off-resonance condition in LSRMDLTR

Post by michael_borland » 22 Oct 2010, 13:27

Kumar,

Sorry for the delayed response. If you want to perform the simulation off-resonance, just specify the laser wavelength. There is nothing in the simulation that requires working on resonance.

--Michael
Top
Post Reply

Return to “General”