Hello,
Is there a way in ELEGANT to save the trajectory of a few macroparticles associated with a bunch while tracking the entire bunch? Thank you, -- Philippe.
saving trajectory associated with macroparticle(s)
Moderators: cyao, michael_borland
-
- Posts: 83
- Joined: 20 Aug 2008, 13:18
- Location: Northern Illinois University & Argonne National Laboratory
- Contact:
-
- Posts: 1945
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: saving trajectory associated with macroparticle(s)
Philippe,
Unfortunately, no. The best I can suggest is the following
--Michael
Unfortunately, no. The best I can suggest is the following
- Add WATCH elements after all locations of interest. The insert_elements command can help with that.
- Use the START_PID and END_PID parameters on the WATCH elements to limit the output to a few interesting particles. This requires that the particles of interest have their particle IDs within a range that excludes all other particles.
- Postprocess to create a file for each particle of interest.
--Michael
- Attachments
-
- followIndividualParticles.zip
- (2.16 KiB) Downloaded 273 times
-
- Posts: 83
- Joined: 20 Aug 2008, 13:18
- Location: Northern Illinois University & Argonne National Laboratory
- Contact:
Re: saving trajectory associated with macroparticle(s)
Michael,
Thank you very much for the suggestion. All the best, -- Philippe.
Thank you very much for the suggestion. All the best, -- Philippe.