Dear Michael,
I am wondering if Touschek lifetime calculation in Elegant depends on the aperture as I added two scrapers and undulator with 3.5 mm gap but I got almost the same Touschek lifetime (about 60 hours) for the bare lattice.
Here is my files if you can kindly take a look.
Many thanks in advance and best regards,
Samira
Lifetime after adding scraper and undulator
Moderators: cyao, michael_borland
-
Samira.kasaei
- Posts: 37
- Joined: 15 Jun 2021, 13:38
Lifetime after adding scraper and undulator
- Attachments
-
- Lifetime.tar.gz
- (1.72 KiB) Downloaded 3 times