Dear Michael,
I introduce aperture of lattice by the "aperture_data ", the aperture shape seems only is rectangle, ellipse is possible with the "aperture_data"? Thank you very much!
Best regards,
Cai
About the aperture_data
Moderators: cyao, michael_borland
-
- Posts: 1933
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: About the aperture_data
Cai,
Unfortunately, only rectangular apertures are possible with the aperture_data command. For more flexibility, I suggest using MAXAMP elements in the lattice file. With these, you can have rectangular, elliptical, and super-elliptical apertures, with open sides if needed.
--Michael
Unfortunately, only rectangular apertures are possible with the aperture_data command. For more flexibility, I suggest using MAXAMP elements in the lattice file. With these, you can have rectangular, elliptical, and super-elliptical apertures, with open sides if needed.
--Michael
Re: About the aperture_data
Dear Michael,
Thank you very much! MAXAMP is good solution and i will use it.
Best regards,
Cai
Thank you very much! MAXAMP is good solution and i will use it.
Best regards,
Cai