Different U0 utilizing CWIGGLER/GFWIGGLER/UKICKMAP?

Moderators: cyao, michael_borland

Post Reply
Shichang
Posts: 11
Joined: 31 May 2017, 07:32

Different U0 utilizing CWIGGLER/GFWIGGLER/UKICKMAP?

Post by Shichang » 07 Nov 2017, 21:47

Hi,all!
When I tried to replace the IDs from CWIGGLER to UKICKMAP,which I got from the example: cwiggler+kickmap.
However I found that U0 calculating by UKICKMAP is less than using CWIGGLER,and I also tried element GFWIGGLER,the result is similar to the
UKICKMAP.
Is this a normal result?Or I have to make some changes in producing input_file of ukickmap?

Thanks!
Shichang

michael_borland
Posts: 1795
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:

Re: Different U0 utilizing CWIGGLER/GFWIGGLER/UKICKMAP?

Post by michael_borland » 08 Nov 2017, 16:31

Shichang,

If you could provide files that show the problem, that would help.

--Michael

Shichang
Posts: 11
Joined: 31 May 2017, 07:32

Re: Different U0 utilizing CWIGGLER/GFWIGGLER/UKICKMAP?

Post by Shichang » 08 Nov 2017, 20:12

Here is my lattice file and the .ele file.
The compressed files are the kickmap.sdds for the IDs,described by CWIGGLER are added in the lattice file.

Thanks for your timely respond!
Shichang
Attachments
ukickmap.rar
(240.35 KiB) Downloaded 155 times
lattice_FO.lte
(53.59 KiB) Downloaded 137 times
injection.ele
(1.57 KiB) Downloaded 115 times

michael_borland
Posts: 1795
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:

Re: Different U0 utilizing CWIGGLER/GFWIGGLER/UKICKMAP?

Post by michael_borland » 09 Nov 2017, 16:21

Shichang,

I think it was a matter of not setting the parameters to the equivalent values. See the attached files. I get very good agreement.

After unzipping the file, change to the 2017-11-09 directory, copy in the kickmaps, and then type "runScript" to execute the test.

--Michael
Attachments
2017-11-09.zip
(10.25 KiB) Downloaded 143 times

Post Reply