space charge simulation in rings

Moderators: cyao, michael_borland

Post Reply
li.chao
Posts: 53
Joined: 18 Aug 2021, 08:59

space charge simulation in rings

Post by li.chao » 05 Nov 2025, 12:02

Dear Michael,

I am studying space-charge effects in rings and would appreciate your advice on a surprising result from an element-by-element tracking test.

I attached the input file that shows how I set up the simulation. In the run I apply a space-charge kick at every quadrupole (element-by-element tracking). For the test I used a flat beam with horizontal emittance emitx=20 pm, and vertical emittance emity=2 pm. I therefore expected stronger emittance growth in the vertical plane.

With a bunch charge of 7.6 nC the attached figure shows the result: contrary to my expectation, the horizontal emittance starts to increase first and more rapidly.
sc_res.png
sc_res.png (6.01 KiB) Viewed 201 times
Could you please help me check what might cause this behaviour?

Yours Chao
Attachments
elegant_space_charge.zip
(500.14 KiB) Downloaded 6 times

Post Reply