Dear All,
I am currently utilizing ELEGANT 2022.2.0 to conduct tests related to orbit correction. However, I've encountered a SIGSEGV error when I attempted to use the `&lification_factors` command. Interestingly, I received the same error message even when using similar example files downloaded from the forum. This has raised the question of whether there might be an unnoticed issue on my end.
I would greatly appreciate any valuable insights or input on this matter. Thank you.
NuanYa
SIGSEGV Error Occured for &lification_factors
Moderators: cyao, michael_borland
-
- Posts: 2
- Joined: 16 Mar 2023, 07:51
SIGSEGV Error Occured for &lification_factors
- Attachments
-
- TPSII-HOA-BVB-2S4SH-Error_V5-RF-CX1CY1.new
- (4.69 KiB) Downloaded 86 times
-
- AFcheck_temp.ele
- (1.33 KiB) Downloaded 92 times
-
- ELEGANT2022-2-0_Question-2_toForum_20231108.pdf
- (159.08 KiB) Downloaded 98 times
-
- Posts: 1945
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: SIGSEGV Error Occured for &lification_factors
NuanYa,
You need to ask for orbit correction in order to get amplification factors. Try adding
(In this case, n_xy_cycles = 1 is required.)
I'll add a check so it doesn't crash. Thanks for the report.
--Michael
You need to ask for orbit correction in order to get amplification factors. Try adding
Code: Select all
&correct
mode = "orbit"
n_xy_cycles = 1
n_iterations = 100
&end
I'll add a check so it doesn't crash. Thanks for the report.
--Michael