FM

Moderators: cyao, michael_borland

Post Reply
Samira.kasaei
Posts: 23
Joined: 15 Jun 2021, 13:38

FM

Post by Samira.kasaei » 08 Mar 2022, 06:31

Dear Michael,

I calculated DA and FMA for a bare lattice and lattice with ID.
But I found DA is increased after adding ID! What is wrong in my calculation?
I attached my files. I do appreciate if you can take a look to my files.


Best regards,
Samira
Attachments
FMA-zip.tar.gz
(254.83 KiB) Downloaded 61 times

Samira.kasaei
Posts: 23
Joined: 15 Jun 2021, 13:38

Re: FM

Post by Samira.kasaei » 24 Mar 2022, 04:08

Dear Michael,

I had a basic question.
Concerning frequency map analysis, when do we introduce these parameters: delta_min, delta_max and ndelta?

Many thanks for your reply,
Samira

michael_borland
Posts: 1772
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:

Re: FM

Post by michael_borland » 01 Apr 2022, 15:54

Samira,

You would introduce those if you want to perform FMA as a function of (x, delta) or (y, delta). For example, for (x, delta), you'd use something like

Code: Select all

&frequency_map  
    output = %s.fma,
    xmin = -0.01, xmax = 0.01, nx = 21,
    ymin = 1e-6, ymax = 1e-6, ny = 1,
    delta_min = -0.04, delta_max = 0.04, ndelta = 21,
    include_changes = 1 
&end 
--Michael

Post Reply