Dear Michael,
I am studying space-charge effects in rings and would appreciate your advice on a surprising result from an element-by-element tracking test.
I attached the input file that shows how I set up the simulation. In the run I apply a space-charge kick at every quadrupole (element-by-element tracking). For the test I used a flat beam with horizontal emittance emitx=20 pm, and vertical emittance emity=2 pm. I therefore expected stronger emittance growth in the vertical plane.
With a bunch charge of 7.6 nC the attached figure shows the result: contrary to my expectation, the horizontal emittance starts to increase first and more rapidly.
Could you please help me check what might cause this behaviour?
Yours Chao
space charge simulation in rings
Moderators: cyao, michael_borland
space charge simulation in rings
- Attachments
-
- elegant_space_charge.zip
- (500.14 KiB) Downloaded 6 times