Focus after plasma problem

Moderators: cyao, michael_borland

Post Reply
Marcello
Posts: 19
Joined: 28 Jan 2015, 10:05

Re: Focus after plasma problem

Post by Marcello » 12 Feb 2015, 05:10

Dear Michael,
These are the input files I used, the beam after plasma simulation was obtained with a fluid code (Qfluid).
noguiding.sdds
(1.27 MiB) Downloaded 216 times
ngplasma.lte
(565 Bytes) Downloaded 229 times
ngplasma.ele
(953 Bytes) Downloaded 208 times
Thanks again,
Marcello
Top
michael_borland
Posts: 1959
Joined: 19 May 2008, 09:33
Location: Argonne National Laboratory
Contact:
Contact michael_borland

Re: Focus after plasma problem

Post by michael_borland » 13 Feb 2015, 15:21

Marcello,

I implemented this as an option. See attached file elegant.tar.gz for the code, ngplasma1.ele for an example of use.

--Michael
Attachments
ngplasma1.ele
(686 Bytes) Downloaded 200 times
elegant.tar.gz
(4.67 MiB) Downloaded 189 times
Top
Post Reply

Return to “Linac Tracking”