Hello,
Is it possible in ELEGANT to define an "overall" aperture so that particles not within this aperture w.r.t. the reference particle *anywhere* along the beamline are lost? Right now the way I do this is to include many collimators along the beamline. I am trying to look at where particle are lost along the beamline after being scattered by an aluminum foil. Thanks! -- Philippe.
aperture
Moderators: cyao, michael_borland
-
Philippe Piot
- Posts: 83
- Joined: 20 Aug 2008, 13:18
- Location: Northern Illinois University & Argonne National Laboratory
- Contact:
-
michael_borland
- Posts: 1959
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: aperture
Philippe,
Yes, you can do this with the MAXAMP element. It sets the aperture for all downstream elements, until overridden by another MAXAMP.
--Michael
Yes, you can do this with the MAXAMP element. It sets the aperture for all downstream elements, until overridden by another MAXAMP.
--Michael