output more points
Moderators: cyao, michael_borland
output more points
Hi, I know that for the main output like .sig file, there are output information for each element entrance and exit. I am wondering if there is a method to output more point within the element, like for a long drift? I hope to output more points in a long drift without splitting it to many small drifts mannualy by myself. Thanks.
-
- Posts: 1951
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: output more points
Ding,
You can use the divide_elements command to subdivide the drift spaces. For example
÷_elements
name = *, type=DRIF, divisions = 10
&end
This command needs to go before run_setup. The manual page is here:
http://www.aps.anl.gov/Accelerator_Syst ... ode27.html
--Michael
You can use the divide_elements command to subdivide the drift spaces. For example
÷_elements
name = *, type=DRIF, divisions = 10
&end
This command needs to go before run_setup. The manual page is here:
http://www.aps.anl.gov/Accelerator_Syst ... ode27.html
--Michael
Re: output more points
Thanks Michael. Unfortunately it doesn't work for a csr drift. Anyway I can try with csr off.
-
- Posts: 1951
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: output more points
Ding,
Sorry about that. It will be fixed in the next release (next week, I hope).
--Michael
Sorry about that. It will be fixed in the next release (next week, I hope).
--Michael