Hello Michael,
How does Elegant use Shunt Impedance, frequency and Q-factor to calculate the voltage and phasor?
Here's how I prepare the data.
I have a spreadsheet of data containing kick factor, frequency and Q-factor.
I calculate Shunt Impedance based on formula above, and then save Shunt Impedance, frequency and Q-factor into a SDDS data using csv2sdds.
Is this the right way to prepare input file for FTRFMODE?
I have also sent you my Elegant files through email separately.
Thank you.
How does Elegant use input file for FTRFMODE?
Moderators: cyao, michael_borland
-
- Posts: 1951
- Joined: 19 May 2008, 09:33
- Location: Argonne National Laboratory
- Contact:
Re: How does Elegant use input file for FTRFMODE?
Wei-hou,
Yes, that sounds right. We usually get the data from an eigenmode solver that gives the quantities needed directly.
--Michael
Yes, that sounds right. We usually get the data from an eigenmode solver that gives the quantities needed directly.
--Michael
Re: How does Elegant use input file for FTRFMODE?
Hello Michael,
Thanks for the confirmation!
Thanks for the confirmation!