Search found 1924 matches
- 25 Jan 2024, 10:07
- Forum: Bugs
- Topic: Possible bug in vary_element
- Replies: 2
- Views: 1430
Re: Possible bug in vary_element
The problem is that you've specified 19 indices (a 19-dimensional scan!) but only one vary_element command. You need at least one vary_element command per index. For example, &run_control n_indices = 2 &end &vary_element index_number=0, index_limit=11, ... &end &vary_element index_number=1, index_li...
- 19 Dec 2023, 19:42
- Forum: Ring Tracking
- Topic: Problems about RFCA/RFCW element
- Replies: 1
- Views: 768
Re: Problems about RFCA/RFCW element
Can you post an example to help me understand what you are trying?
--Michael
--Michael
- 19 Dec 2023, 18:42
- Forum: Linac Tracking
- Topic: Discrepany in R26 and R56 for transversely offset KQUAD
- Replies: 2
- Views: 744
Re: Discrepany in R26 and R56 for transversely offset KQUAD
I'll have to look into why that term is missing. Meanwhile, you can add "TRACKING_MATRIX=2" to the definition of the KQUAD element to get a tracking-based matrix, which includes this term. I suppose that other R5X and RX6 terms will also change as a result. One thing to be aware of in comparing to o...
- 19 Dec 2023, 18:29
- Forum: Parallel Elegant
- Topic: Pelegant I/O issue for CSRDRIFT element
- Replies: 2
- Views: 652
Re: Pelegant I/O issue for CSRDRIFT element
Gregg, Unfortunately, that feature is not supported for the parallel version, although you have no way to know that from the manual. Those messages indicate that each processor is trying to open the same file, and failing. I'll put it on my to-do list to provide parallel support, although I wouldn't...
- 19 Dec 2023, 18:18
- Forum: Ring Tracking
- Topic: Inconsistent Results in Orbit Correction Testing
- Replies: 2
- Views: 850
Re: Inconsistent Results in Orbit Correction Testing
After a little more looking, I've concluded that this isn't a bug, but rather a result of the presence of linear and nonlinear coupling, through tilted quadrupoles and sextupoles, respectively. Elegant alternates between correcting in the x and y planes. With n_xy_cycles=1, it corrects the x plane, ...
- 19 Dec 2023, 17:15
- Forum: Ring Tracking
- Topic: SIGSEGV Error Occured for &lification_factors
- Replies: 1
- Views: 605
Re: SIGSEGV Error Occured for &lification_factors
NuanYa, You need to ask for orbit correction in order to get amplification factors. Try adding &correct mode = "orbit" n_xy_cycles = 1 n_iterations = 100 &end (In this case, n_xy_cycles = 1 is required.) I'll add a check so it doesn't crash. Thanks for the report. --Michael
- 19 Dec 2023, 15:09
- Forum: Feature Requests
- Topic: Laser-Electron Interactions
- Replies: 1
- Views: 583
Re: Laser-Electron Interactions
Joe,
That would be pretty easy to implement, but I'm not sure when I'll get to it.
Meanwhile, it is easy to do with a SCRIPT element, which allows you to transform the particle distribution using an external program or script.
--Michael
That would be pretty easy to implement, but I'm not sure when I'll get to it.
Meanwhile, it is easy to do with a SCRIPT element, which allows you to transform the particle distribution using an external program or script.
--Michael
- 19 Dec 2023, 14:42
- Forum: Ring Tracking
- Topic: Inconsistent Results in Orbit Correction Testing
- Replies: 2
- Views: 850
Re: Inconsistent Results in Orbit Correction Testing
This seems to be a bug that appears when n_xy_cycles=1. Set n_xy_cycles to 2 or higher in &correct and you should see consistency.
Thanks for reporting the problem.
--Michael
Thanks for reporting the problem.
--Michael
- 19 Dec 2023, 14:27
- Forum: Ring Tracking
- Topic: Search of closed orbit in a ring with BGGEXP elements
- Replies: 2
- Views: 699
Re: Search of closed orbit in a ring with BGGEXP elements
Ryutaro, I would be suspicious of this result. First, the convergence warning indicates that the normal algorithm had a problem. Second, you have tracking_turns=1, which asks elegant to use a fall-back multi-turn tracking method; however, you only asked it to use 1 turn, which isn't reliable. It som...
- 19 Dec 2023, 14:20
- Forum: General
- Topic: Version 2023.4 released
- Replies: 0
- Views: 1826
Version 2023.4 released
Version 2023.4 has been released, with several feature and performance improvements. See the change log in the manual for details.
--Michael
--Michael