&global_settings
  mpi_io_write_buffer_size = 1048576,
&end

&run_setup
  semaphore_file = run_setup.semaphore,
  centroid = "run_setup.centroid.sdds",
  final = "run_setup.final.sdds",
  final_pass = 1,
  lattice = "elegant.lte",
  magnets = "run_setup.magnets.sdds",
  output = "run_setup.output.sdds",
  p_central_mev = 58,
  parameters = "run_setup.parameters.sdds",
  sigma = "run_setup.sigma.sdds",
  use_beamline = "BL1",
&end

&run_control
  n_steps = 5,
&end

&optimization_setup
  n_evaluations = 2000,
  n_passes = 2,
  n_restarts = 2,
  tolerance = 0.01,
&end
&optimization_variable
  item = "K1",
  lower_limit = -45,
  name = "Q6",
  step_size = 0.05,
  upper_limit = -25,
&end
&optimization_variable
  item = "K1",
  lower_limit = 30,
  name = "Q7",
  step_size = 0.05,
  upper_limit = 45,
&end
&optimization_variable
  item = "K1",
  lower_limit = -12,
  name = "Q8",
  step_size = 0.05,
  upper_limit = -2,
&end


&optimization_term
  term = "M2#1.betaxBeam 0.00924218701759 0.001 sene",
  weight = 1,
&end

&optimization_term
  term = "M2#1.betayBeam 0.0070638841747 0.001 sene",
  weight = 1,
&end


&optimization_term
  term = "M2#1.alphaxBeam 0.0 0.001 sene",
  weight = 1,
&end

&optimization_term
  term = "M2#1.alphayBeam 0.0 0.001 sene",
  weight = 1,
&end

&sdds_beam
  input = "pwfa_good.sdds",
  reuse_bunch = 1,
  sample_interval = 4,
&end

&optimize
  summarize_setup = 1,
&end

&save_lattice
  filename = "save_lattice.filename.lte",
  output_seq = 1,
&end