! test CSBEND with EPITCH parameter and REFERENCE_CORRECTION
! energy	2000000000
!
! defining the standard individual elements
BEND1: CSBEND,GROUP=BEND1,L=0.34,ANGLE=0.058177641728,K1=0,E1=0,E2=0,TILT=0,DX=0,DY=0,DZ=0,ETILT=0,EPITCH=1.e-5,EYAW=0,EDGE1_EFFECTS=0,EDGE2_EFFECTS=0,REFERENCE_CORRECTION=0,MALIGN_METHOD=2,SYNCH_RAD=0,N_SLICES=10
BEND1R: CSBEND,GROUP=BEND1,L=0.34,ANGLE=0.058177641728,K1=0,E1=0,E2=0,TILT=0,DX=0,DY=0,DZ=0,ETILT=0,EPITCH=1.e-5,EYAW=0,EDGE1_EFFECTS=0,EDGE2_EFFECTS=0,REFERENCE_CORRECTION=1,MALIGN_METHOD=2,SYNCH_RAD=0,N_SLICES=10
!
! defining the apertures as needed
APER_BEND1: MAXAMP,X_MAX=0.006,Y_MAX=0.006,ELLIPTICAL=1
!
! defining the full beamline
RING: LINE=(&
APER_BEND1,BEND1)
RINGR: LINE=(&
APER_BEND1,BEND1R)