!!!!!
! ERL_ Quad beam line in injector part
!!!!!

Q: CHARGE, TOTAL = 80E-12

M1 : MARK, fitpoint =1

QMAC01: KQUAD, L=0.1, K1=0, N_KICKS=30
QMAC02: KQUAD, L=0.1, K1=0, N_KICKS=30
QMAC03: KQUAD, L=0.1, K1=0, N_KICKS=30
QMAC04: KQUAD, L=0.1, K1=0, N_KICKS=30

SRF:  RFCA, L = 1, VOLT = 15E6, FREQ = 1.3E9, CHANGE_P0=1,
                   END1_FOCUS = 1, END2_FOCUS = 1 ,BODY_FOCUS_MODEL = "SRS"

L0: DRIFT, L=0.436
L1: DRIFT, L=0.5
L2: DRIFT, L=0.1
L3: DRIFT, L=0.2
L4: DRIFT, L=1.250
L5: DRIFT, L=8.6
L6: DRIFT, L=5

Q4: LINE=(Q, L0, QMAC01, L2, M1, QMAC02, L2, M1, QMAC03, L2, M1, QMAC04, M1, L2, L2,  L4, SRF, L1, SRF, L4 , L5, M1)
USE, Q4
RETURN