! Define charge
CHARGE     : CHARGE, TOTAL= 0.1e-9


! ==============================================================
! Beam Position Monitors

ACCS           : MONI

! ==============================================================
! Markers

ELECTRON_LINE_BEGIN: MARKER
ELECTRON_LINE_END:   MARKER

! ==============================================================
! ==============================================================
! Define quadrupole and sextupole magnets


Q12:  QUAD, L = 0.20, K1 =    3.6247315 ;
Q22:  QUAD, L = 0.20, K1 =   -3.5370016 ;
Q32:  QUAD, L = 0.20, K1 =   13.4334320 ;

! For sextupole magnet used
QS1:  SEXT, L = 0.20, K2 =   17.8417089 ;
QS2:  SEXT, L = 0.20, K2 = -768.1754583 ;
QS3:  SEXT, L = 0.20, K2 =  768.1754583 ;
QS4:  SEXT, L = 0.20, K2 =  -17.8417089 ;

! For sextupole magnets OFF
!QS1:  SEXT, L = 0.20, K2 =   0 ;
!QS2:  SEXT, L = 0.20, K2 =   0 ;
!QS3:  SEXT, L = 0.20, K2 =   0 ;
!QS4:  SEXT, L = 0.20, K2 =   0 ;



! ==============================================================
! ==============================================================
! Define Bending dipole magnets

B1:    SBEND, L = 0.2, ANGLE =  +0.174533, e1= 0, e2= 0, TILT = 0, FINT=0.0, HGAP = 0.03, EDGE1_EFFECTS=1, EDGE2_EFFECTS=1, ORDER = 2
B2:    SBEND, L = 0.2, ANGLE =  -0.174533, e1= 0, e2= 0, TILT = 0, FINT=0.0, HGAP = 0.03, EDGE1_EFFECTS=1, EDGE2_EFFECTS=1, ORDER = 2

! ==============================================================
! Drift tubes


! Section2
D12a : CSRDRIFT,L = 0.10000000, CSR=0,  DZ=0.01,  USE_STUPAKOV=1
D12b : DRIF,	L = 0.10000000
D12  : DRIF,	L = 2.20000000
D22  : DRIF,	L = 2.00000000
D25  : DRIF,	L = 1.80000000
DS   : DRIF,	L = 0.00000000

test:      line=(CHARGE, ELECTRON_LINE_BEGIN, ACCS,                                                                      &
                 B1, D12a,D12, Q12, DS, QS1, D22, Q22, D25, QS2, Q32, QS3, D25, Q22, D22, QS4, DS, Q12, D12b, D12, B2,   &   
				 ELECTRON_LINE_END)