! 
ICS_FITPT:   marker, FITPOINT=1


!Screen at entrance/exit of CM1
ICS_SFF:    WATCH,FILENAME="%s.FF"

ICS_d0:	    drift, L=0.10
ICS_Q1:     QUAD,L=0.030,K1=-150
PMQ_Q1:	    KQUAD, L=0.030, BORE=4e-3, B=0.6
ICS_d1:     drift, L=0.053
ICS_Q2:     QUAD,L=0.054,K1= 150
PMQ_Q2:     KQUAD, L=0.054, BORE=4e-3, B=0.6
ICS_d2:     drift, L=0.053
ICS_Q3:     QUAD,L=0.030,K1=-150
PMQ_Q3:     KQUAD, L=0.030, BORE=4e-3, B=0.6
ICS_d3:     drift, L=0.300

! beamline with usual quads
FinFocH:    line=(ICS_d0, ICS_Q1, ICS_d1, ICS_Q2, ICS_d2, ICS_Q3, &
                      ICS_d3, ICS_FITPT)

FinFoc:	    line=(ICS_d0, ICS_Q1, ICS_d1, ICS_Q2, ICS_d2, ICS_Q3, ICS_d3, &
                      ICS_FITPT, ICS_SFF, ICS_d3, ICS_Q3, ICS_d2, ICS_Q2, ICS_d1, &
		      ICS_Q1, ICS_d0)

FinFocD:    line=(ICS_FITPT, ICS_SFF, ICS_d3, ICS_Q3, ICS_d2, ICS_Q2, ICS_d1, &
		      ICS_Q1, ICS_d0)

! same beamlines with PMQs (KQUADs instead of QUADs)

FinFocHPMQ:    line=(ICS_d0, PMQ_Q1, ICS_d1, PMQ_Q2, ICS_d2, PMQ_Q3, &
                      ICS_d3, ICS_FITPT)

FinFocPMQ:	    line=(ICS_d0, PMQ_Q1, ICS_d1, PMQ_Q2, ICS_d2, PMQ_Q3, ICS_d3, &
                      ICS_FITPT, ICS_SFF, ICS_d3, PMQ_Q3, ICS_d2, PMQ_Q2, ICS_d1, &
		      PMQ_Q1, ICS_d0)

! downstream line
FinFocDPMQ:    line=(ICS_FITPT, ICS_SFF, ICS_d3, PMQ_Q3, ICS_d2, PMQ_Q2, ICS_d1, &
		      PMQ_Q1, ICS_d0)