Please follow the instructions/guidelines below to enter the points and their coordinates:
-
The origin of the XY coordinates must be at the center of the beam footprint. The horizontal
direction is represented by the X-axis, and the vertical by the Y-axis (see the figure below).
-
Do not enter Z-coordinates
-
The data can be entered manually or pasted in the left textarea. Values can be separated by
comma, space, semicolon, or quotes.
-
Zero values must be entered explicitly (white space or blanks will not work)
-
The points (nodes) can be entered in any order. The power densities are equivalent to HFLUX in ANSYS.